You are here:The general dynamic balance ma >> HQ-5 hard-bearing balancing machine (lap belt)
HQ-5 hard-bearing balancing machine (lap belt)

HQ-5 hard-bearing balancing machine (lap belt)

Details
         This machine is widely used in various types of micro motors, power tools, small shafts and other rotating workpiece balance correction. The machine adopts the lap belt drive, with high efficiency, easy operation, intuitive display, measuring rapid, high stability, in the course of just the geometry of the workpiece supporting input mode and other parameters measuring box, you can after a run, it will directly display the measured unbalance amount and the phase of the rotor. 
Specifications HQ-5 
Max weight (kg) 5 
Workpiece diameter (mm) Ф350 
Distance between the two (mm) 30-500 
Workpiece support shaft diameter range (mm) 3-30 
Lap belt drive at a range of diameters (mm) 10-120 
When balancing machine speed (r / min) Drag the workpiece diameter Ф100 500/650/1000/1340 
Motor power (kw) 0.12 
The minimum achievable residual unbalance (g mm / kg) ≤0.3 
Unbalance reduction ratio ≥90%